A. Pre-filtration or RO system,DI water
B. Solvents,selected acids&lyes,chemical industry
C. Semiconductor,Eletronic industry ultrapure water system
D. FOOD and beverage,drinking water treatment
E. Oil industry
A. Media:Polypropylene
B. Support layer:Polypropylene
C. Core/Cage/End adaptor:Polypropylene
D. Sealing method:Thermal bonding
A. Max.Differential pressure:
B. Forward-75psi (5.1bar) at 25℃
C. Forward-25psi (1.7bar) at 80℃
D.Reverse-30psi (2.0bar) at 25℃
E. Filters change recommended at 1.5-2.0bar
F. Max.Operating temperature:80℃
G. Sterilization:5times,20Minutes cycles at 121℃
A. Filtration Area:0.5㎡ each 10″length
B. Outer Diameter:69mm
C. Nominal Length:5″,10″,20″,30″,40″etc
D. Micron Rating:0.1,0.2,0.45,0.65,1,3,5…µm
Model PPL | Micron Rating | End Adaptor | Seal | Length |
PPL - PP |
0.10:0.1μm 0.20:0.2μm 0.45:4.5μm 100:1μm 300:3μm ...... H10:10μm |
CODE O - DOE Double Open End 7 - 226/Fin 8 - 222/Fin 3 - 222/Flat Closed 2 - 226/Flat Closed F - 215/Flat Closed S - O - Ring Insert/Flat Closed |
E - EPDM N - Buna S - Silicon V - Viton T - Telfon |
5:5" 10:10" 20:20" 30:30" 40:40" |