YOUR LOCATION : HOMEPAGE >> PRODUCTS >> MF FILTER CARTRIDGE

Nominal Rated PP Melt Blown / Spun Cartridge Filters

Nominal Rated PP Melt Blown / Spun Cartridge Filters

Features & Benefits
• Surface pore structure spreads water flow to reduce pressure drop
• Continuously gradient pore structure increases the capacity of dust holding, longer service life and high efficiency
• High strength and pressure resistance
• Micro-denier melt blown filtration fiber, high removal ratings
• 100% PP for compatibility with a wide range of process fluids
• Formed by thermal bond without use of any binders and adhesives

INTRODUCTION:

High performance pure polypropylene depth dual-gradient density filter media is under highly controlled manufacturing process which guarantees consistently reproducible filter performance. PM-series filters are comprised of an inner compact rated section for exceptional dirt-holding capability and the outstanding performance which meets the highest quality requirements are selected for critical filtration application.
PM-Series cartridge is able to retain contaminants throughout the entire cross section of the filter. The density increases progressively from the exterior surface to the interior and "graded density" allows larger particles to be trapped near the surface while smaller particles penetrate the larger open areas to be trapped nearer the center of the filter in the smaller openings.

Applications

• Drinking water treatment
• Pre-filtration for RO+DI
• Food and beverage
• Plating, Chemicals and Solvents

 

Specifications

• Material : 100% PP microfiber
• Micron rating: 1, 3, 5, 10, ... 100um
• OD. 62-65mm/110-115mm; ID. 28mm
• Length: 5", 10", 20", 30", 40", 50", 60"

Operating Conditions

• Maximum differential pressure: 4.1bar at 20℃; 2.1bar at 60℃; 1.1bar at 80℃
• Recommended change out: 2.0bar
• Maximum temperature: 80℃

Dual-Gradient Density Media Rating (um)

Nominal Micron Rating (um) 1 3 5 10 25 50
Outer Pre-Filter Media (um) 25 25 50 50 75 100
Inner Compact Media (um) 1 3 5 10 25 50

Dirt Holding Capacity

Micron Rating(μm) 1 3 5 10 25 50
Dirt Holding Capacity(Gram/10"L) >15 >20 >30 >60 >120 >150
 

Ordering Guide

Model PM Media Type Support Core Dimension Micron Rating End Adaptor Seal Length Inch

PM-1
Standard

PM-2
Thin Groove

PM-3
Broad Groove

PM-4
Cavity Surface

P-High
Performance

A-Absolute
Rate

P-pp

N-none

S-ID28mm
OD62-65mm

B-ID28mm
OD110-115mm

L-ID96/114mm
OD150mm

01:1μm

03:3μm

05:5μm

10:10μm

......

......

Code 0-DOE w/o adaptor

Code 7 - 226/Fin

Code 8 - 222/Fin

Code 3 - 222/Flat closed

Code S - Spring Cap

E-EPDM

N-Buna

S-Silicone

V-Viton

5:5"

10:10"

20:20"

30:30"

40:40"

50:50"

60:60"