YOUR LOCATION : HOMEPAGE >> PRODUCTS >> MF FILTER CARTRIDGE

PP Membrane pleated Filter cartridge

PP Membrane pleated Filter cartridge

Features & Benefits
A. High surface area
B. Wide selection of micron rating to meet different filtration requirement
C. Increased dirt holding capacity.Longer service life
D. Constructed of all polypropylene high purity media,meets FDA requirements.
E. Multiple layered micro-porous construction ensures consistent filtration performance.
F. No adhesive,thermal bonded manufacturing enable the smallest contaminant extraction and high durability.
G. Wide selection of micron rating to meet different filtration requirement.

INTRODUCTION:

Applications

A. Pre-filtration or RO system,DI water
B. Solvents,selected acids&lyes,chemical industry
C. Semiconductor,Eletronic industry ultrapure water system
D. FOOD and beverage,drinking water treatment
E. Oil industry

Material Of Construction

A. Media:Polypropylene
B. Support layer:Polypropylene
C. Core/Cage/End adaptor:Polypropylene
D. Sealing method:Thermal bonding

Recommended Operating Conditions

A. Max.Differential pressure:
B. Forward-75psi (5.1bar) at 25℃
C. Forward-25psi (1.7bar) at 80℃
D.Reverse-30psi (2.0bar) at 25℃
E. Filters change recommended at 1.5-2.0bar
F. Max.Operating temperature:80℃
G. Sterilization:5times,20Minutes cycles at 121℃

Cartridge Dimensions

A. Filtration Area:0.5㎡ each 10″length
B. Outer Diameter:69mm
C. Nominal Length:5″,10″,20″,30″,40″etc
D. Micron Rating:0.1,0.2,0.45,0.65,1,3,5…µm

 

Odering Guide

Model PPL Micron Rating End Adaptor Seal Length

PPL - PP
Pleated Type

0.10:0.1μm

0.20:0.2μm

0.45:4.5μm

100:1μm

300:3μm

......

H10:10μm

CODE

O - DOE Double Open End

7 - 226/Fin

8 - 222/Fin

3 - 222/Flat Closed

2 - 226/Flat Closed

F - 215/Flat Closed

S - O - Ring Insert/Flat Closed

E - EPDM

N - Buna

S - Silicon

V - Viton

T - Telfon
Encapsulated Viton

5:5"

10:10"

20:20"

30:30"

40:40"