YOUR LOCATION : HOMEPAGE >> PRODUCTS >> MF FILTER CARTRIDGE

PES Membrane Pleated filter cartridge

PES Membrane Pleated filter cartridge

Features & Benefits
A. Unique hydrophilic polyethersulfone cartridges with absolutely rated
B. Cartridges consist of a polyethersulfone membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.
C. The compatibility with a broad range of chemicals and physiologicalinertness
D. Cartridges 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance
E. Flushed with ultrapure water to remove any manufacturing debris
F. No adhesive,thermal bonded manufacturing enable the smallest contaminant extraction and high durability.
G. Increased surface area with excellent flow rates

INTRODUCTION:

Applications

A. Final filtration for bacteria removal in RO system
B. Sterilization of food and beverages
C. Micro-filtration in ultrapure water system
D. Beverage and wine filtration/clarification
E. Photographic solutions
F. Plating solutions
G. Magnetic coatings

Material Of Construction

A. Media:Hydrophilic Polypropylene
B. Support layer:Polypropylene
C. Core/Cage/End adaptor:Polypropylene
D. Sealing method:Thermal bonding

Recommended Operating Conditions

A. Max.Differential pressure:
B. Forward-70psi (4.8bar) at 25℃
C. Reverse-40psi (2.7bar) at 25℃
D. Filters change recommended at 1.5bar
E. Max.Operating temperature:80℃
F. Sterilization:20times,30Minutes cycles at 121℃

Cartridge Dimensions

A. Filtration Area:0.55㎡ each 10″length
B. Outer Diameter:69mm
C. Nominal Length:5″,10″,20″,30″,40″etc
D. Micron Rating:0.1,0.2,0.45µm

Recommended Integrity Test

Pore Size Minimum Water
Bubble Point
Diffusional Flow CC/Min @ Test Pressure 10" Length
0.1μm -- ≤15 @ 48 Psig (3.3Bar)
0.2μm ≥45 Psig (3.1Bar) ≤15 @ 35 Psig (2.4Bar)
0.45μm ≥24 Psig (1.7Bar) ≤15 @ 20 Psig (1.4Bar)
 

Odering Guide

Model PES Micron Rating End Adaptor Seal Length

PES - PES
Pleated Type

0.10:0.1μm

0.20:0.2μm

0.45:4.5μm

CODE

O - DOE Double Open End

7 - 226/Fin

8 - 222/Fin

3 - 222/Flat Closed

2 - 226/Flat Closed

F - 215/Flat Closed

S - O - Ring Insert/Flat Closed

E - EPDM

N - Buna

S - Silicon

V - Viton

T - Telfon
Encapsulated Viton

5:5"

10:10"

20:20"

30:30"

40:40"