YOUR LOCATION : HOMEPAGE >> PRODUCTS >> MF FILTER CARTRIDGE

Nylon Membrane Pleated Filter Cartridge

Nylon Membrane Pleated Filter Cartridge

Features & Benefits
A. Hydrophilic Nylon 6 membrane pleated cartridges with absolutely rated
B. Cartridges consist of a Nylon 6 membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.
C. Superior flow rate and efficiency maximizing performance
D. Non-fiber releasing according to pharmaceutics and food industry requirements.
E. Possessing  better performance of high temperature-resistance,acid and base resistance.
F. Remove particles and microorganisms greater than 0.2µm from gas and liquid
G. Cartridges 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance
H. Flushed with ultrapure water to remove any manufacturing debris
I. No adhesive,thermal bonded manufacturing without adhesives

INTRODUCTION:

Applications

A. Final filtration for bacteria removal in reverse osmosis,deionization and other ultrapure water systems
B. Particle filtration for ultrapure chemicals
C. Semiconductor,Electronic industry ultrapure water system
D. Food and beverage,drinking water treatment
E. Plating solutions
F. Pharmaceuticals

Material Of Construction

A. Media:Hydrophilic Nylon
B. Support layer:Polypropylene
C. Core/Cage/End adaptor:Polypropylene
D. Sealing method:Thermal bonding

Recommended Operating Conditions

A. Max.Differential pressure:
B. Forward-70psi (4.8bar) at 25℃
C. Reverse-40psi (2.7bar) at 25℃
D. Filters change recommended at 1.5bar
E. Max.Operating temperature:80℃
F. Sterilization:20times,30Minutes cycles at 121℃

Cartridge Dimensions

A. Filtration Area:0.65㎡ each 10″length
B. Outer Diameter:69mm
C. Nominal Length:5″,10″,20″,30″,40″etc
D. Micron Rating:0.1,0.2,0.45,0.65µm

Recommended Integrity Test

Pore Size Diffusional Flow CC/Min @ Test Pressure 10" Length
0.1μm ≤55 @ 48 Psig (3.3Bar)
0.2μm ≤55 @ 35 Psig (2.4Bar)
0.45μm ≤55 @ 20 Psig (1.4Bar)
0.65μm ≤55 @ 15 Psig (1.0Bar)
 

Odering Guide

Model Nylon Micron Rating End Adaptor Seal Length

N6-Nylon
Pleated Type

010:0.1μm

020:0.2μm

045:4.5μm

065:6.5μm

......

CODE

O - DOE Double Open End

7 - 226/Fin

8 - 222/Fin

3 - 222/Flat Closed

2 - 226/Flat Closed

F - 215/Flat Closed

S - O - Ring Insert/Flat Closed

E - EPDM

N - Buna

S - Silicone

V - Viton

T - Telfon
Encapsulated Viton

5:5"

10:10"

20:20"

30:30"

40:40"